Mr. Appliance NYC

Miele Dish Washer Troubleshooting Part 2

admin — Mon, 08 Mar 2010 15:18:04 +0000

Your Miele dish washer provides excellent functionality and keeps your dishes sparkling and spotless. Miele makes wonderful dish washers and other appliance but every once in a while they need some care. We took a look at some common issues in out first Miele dishwasher troubleshooting post and we look at some more common issues here. If you are experiencing any issues with your Miele dishwasher please take a look at our troubleshooting advice. If you are still having an issue and need appliance repair service in New York, please contact us at Mr. Appliance NYC and we will send an experienced and professional appliance repair technician to you.

Miele Dish Washer Troubleshooting Advice

There is a knocking noise in the cabinet

Check whether spray arms are knocking against an item in a basket. If the source of noise cannot be determined, run a program without plates or glassware. If the noises continue, please contact our Customer Service.

Poor cleaning results

Clean your appliance as described in the operating instructions under “Cleaning and Care”. If the appliance continues to produce poor results, please contact our Customer Service.

The door cannot be opened

Check that the child-safety function is not activated. This can be deactivated as described in the operating instructions.

The salt reservoir has inadvertently been filled with detergent

Do not switch on the appliance, as detergent causes serious damage to the water softener. Please contact our Customer Service for information on how to proceed.

The inlet/drain indicator is flashing and an audible sound can be heard during drainage

Possibly there is debris in the drain pump. Please remove it according to the operating manual. You will find the proper instructions under the manual’s sections “Problem solving” and “Cleaning and care”.

The fault message “F52″ is indicated in the display

A sensor detected too much foam in the wash cabinet. The cleaning program has been interrupted. To erase the fault message, please turn the program selector to the “Stop/End” position or press the button “Start/Stop” for around 5 seconds, depending on the model type. Afterwards switch the appliance off and on. If detergent tabs are used, which already include the rinse aid, the function “2 in 1″ should be selected.
Please do not use detergent tabs in the program “Quick wash 40°C”.

Miele Dishwasher Troubleshooting

admin — Wed, 03 Mar 2010 14:10:39 +0000

Mr Appliance NYC offers high end appliance repair service for residents of New York City. In our efforts to provide useful information and assistance we are providing troubleshooting advice for a wide range of appliance issues. Today we will offer advice for troubleshooting problems with Miele dishwashers. If the advice provided here does not cover the issue you are having please contact Mr. Appliance NYC for appliance repair service in New York City.

Troubleshooting Miele Dishwasher Common Issues

The program does not start

Check that the power cord is correctly inserted and that the circuit breaker has not tripped. Check that the door is closed properly and that the correct program has been selected and started.

The appliance does not start immediately when switched on

Do not switch the machine off. Some Miele dishwashers are equipped with a water softener reactivation cycle which is automatically activated on program start and lasts approx. 10 mins. After this, the appliance then continues as normal.

The inlet/drain indicator is flashing

Check that the water valves are opened fully or whether the water inlet hose is kinked. Check that the water inlet filter is not clogged and clean it, if necessary, as described in the operating instructions. Check that the drain pump is not clogged. This can be cleaned as described in the operating instructions. Reset the error message as follows: To cancel the error message, turn the rotary selector switch to “Stop/End” or press the “Start/Stop” switch for approx. 5 secs. Then switch the appliance off and then back on again. If the fault message reappears, please contact our Customer Service.

All indicators are flashing

Reset the error message as follows: To cancel the error message, turn the rotary selector switch to “Stop/End” or press the “Start/Stop” switch for approx. 5 secs. Then switch the appliance off and then back on again. If the fault message reappears, please contact our Customer Service.

“F..” appears in the display

Reset the error message as follows: To cancel the error message, turn the rotary selector switch to “Stop/End” or press the “Start/Stop” switch for approx. 5 secs. Then switch the appliance off and then back on again. If the fault message reappears, please contact our Customer Service.

Sub-Zero Pro-48 Fridge Troubleshooting Part 3

admin — Sat, 30 Jan 2010 16:26:15 +0000

My. Appliance NYC, your ultimate resource for appliance repair professionals in New York City wants to help you keep your appliances working for you. To ensure that your appliances are functioning in the optimal manner we are providing troubleshooting advice for a wide range of appliance brands and types. This is part3 in the Sub-Zero Pro 48 Ttroubleshooting series. If the advice provided here does not cover the issue you are having please contact Mr. Appliance NYC for appliance repair service in New York City.

You hear unusual noises

These noises may be normal operating sounds related to refrigerant circulation, fan operation, ice maker operation, defrost cycle or compressor operation.

You hear occasional buzzing

Is the water supply connected to ice maker and turned on?

Condensation forms inside the unit

This is normal during periods of higher humidity (summer) and with frequent door openings.
Are doors and drawers closing and sealing properly?

Condensation forms outside the unit

During periods of high humidity, some condensation may appear on outside surfaces. The condensation will disappear when the humidity drops. Be sure doors and drawers are closing and sealing. If condensation persists, contact Mr. Appliance NYC.

Outside of the freezer compartment heats up

Clean the condenser area

There is no ice

Is the ice maker turned on?
Is the water supply connected?

Food has created an odor inside the unit

Clean the unit thoroughly
Cover all food tightly
Discard outdated food

Sub-Zero Pro-48 Troubleshooting Part 2

admin — Sat, 23 Jan 2010 14:54:51 +0000

New York City appliance repair professionals Mr. Appliance NYC offers full service appliance repair to the Manhattan, New York area. In some cases it’s not necessary to call us when you are having problems with your appliances. That’s why we are providing advice on how to troubleshoot common issues with household appliances. This is part 2 in the Sub-Zero Pro 48 Ttroubleshooting series. If the advice provided here does not cover the issue you are having please contact Mr. Appliance NYC for appliance repair service in New York City.

Refrigerator/Freezer is not running

Is there electrical power to the unit?
Is your home circuit breaker or fuse off?
Is your refrigerator/freezer control set to ”ON”?
Is the condenser area clean?
Has either door been left open for an extended period? Be sure that food is not obstructing proper door or drawer closing.
If unit has been off for short time frame and unit is still not running, it may be in defrost mode.
Wait 30 minutes and try to restart again.

Refrigerator/Freezer is warmer than usual

Is your control set properly?
Is your condenser area clean?
Has the door been open for a long time?
Have you recently added a large amount of food?

Refrigerator/Freezer runs for long periods of time

Is the condenser area clean?
On hot days and in warm room temperatures, the motor runs longer
Have the doors or drawers been open for a long time?
Have you recently added a large amount of food?
Has either a door or drawer been left open accidentally? Be sure that food is not obstructing door or drawer from closing.
There may be normal operation noises related to refrigerant circulation, fan operation, ice maker operation, defrost cycle or compressor operation.

Refrigerator/Freezer is frosted up

Has a door or drawer been left open for an extended period?
Are doors and drawers closing and sealing properly? Contact your dealer if doors or drawers are not adjusted properly. NOTE: When opening drawers, you may notice a side-to-side motion in the drawer. This motion is normal, with the tolerance built into the drawer slides. When the drawer is closed, it will automatically adjust and close with correct alignment.

Sub-Zero Pro-48 Refrigerator Troubleshooting

admin — Sat, 16 Jan 2010 19:42:17 +0000

Mr Appliance NYC is here to provide New York City appliance repair service. In our efforts to provide the best service we will be offering troubleshooting information for a wide range of appliances. Today we will offer advice for troubleshooting problems with the Sub-Zero Pro-48 Refrigerator. If the advice provided here does not cover the issue you are having please contact Mr. Appliance NYC for appliance repair service in New York City.

Troubleshooting for the Sub-Zero Pro-48 Part 1

If your refrigerator or freezer is not operating properly, use the following troubleshooting guide before calling Mr. Appliance NYC. This guide will save you time and trouble and may avoid the expense of a service call. This is part 1 in a series of troubleshooting advice for the Sub Zero Pro 48 refrigerator.

SERVICE is illuminated in the exterior temperature display

The microprocessor has sensed a problem with the operating system. There may be instructions in the exterior temperature display to solve the problem. If not, contact Mr. Appliance NYC.

SERVICE is flashing in the exterior temperature display

This happens when one or more of the zones runs too long, or a temperature sensor may be faulty. This could be from a dirty condenser. If this occurs, clean the condenser following the procedure outlined on page 13. Turn the unit off with the POWER key pad and then restart by depressing the key pad again. If SERVICE is still flashing contact Mr. Appliance NYC.

Service and ice lights are both flashing

This occurs when the solenoid valve for the ice maker is activated too long. Check for excess water near the ice maker. If you see excess water, turn off the water at the shut-off valve and call for service. If there is no excess water, turn the unit off and back on to reset and see if this corrects the problem. If the problem continues, call Mr. Appliance NYC.

The Mr. Appliance NYC Blog

admin — Sat, 22 Aug 2009 12:46:04 +0000

Welcome to The Mr. Appliance NYC Blog. We will be exploring appliance repair issues, providing advice and how to information, and even having fun with some appliance repair horror studies and humorous situations. Check back often to see what we are up to at Mr. Appliance NYC.

No related posts.