Mr Appliance NYC is here to provide New York City appliance repair service. In our efforts to provide the best service we will be offering troubleshooting information for a wide range of appliances. Today we will offer advice for troubleshooting problems with the Sub-Zero Pro-48 Refrigerator. If the advice provided here does not cover the issue you are having please contact Mr. Appliance NYC for appliance repair service in New York City.
Troubleshooting for the Sub-Zero Pro-48 Part 1
If your refrigerator or freezer is not operating properly, use the following troubleshooting guide before calling Mr. Appliance NYC. This guide will save you time and trouble and may avoid the expense of a service call. This is part 1 in a series of troubleshooting advice for the Sub Zero Pro 48 refrigerator.
SERVICE is illuminated in the exterior temperature display
- The microprocessor has sensed a problem with the operating system. There may be instructions in the exterior temperature display to solve the problem. If not, contact Mr. Appliance NYC.
SERVICE is flashing in the exterior temperature display
- This happens when one or more of the zones runs too long, or a temperature sensor may be faulty. This could be from a dirty condenser. If this occurs, clean the condenser following the procedure outlined on page 13. Turn the unit off with the POWER key pad and then restart by depressing the key pad again. If SERVICE is still flashing contact Mr. Appliance NYC.
Service and ice lights are both flashing
- This occurs when the solenoid valve for the ice maker is activated too long. Check for excess water near the ice maker. If you see excess water, turn off the water at the shut-off valve and call for service. If there is no excess water, turn the unit off and back on to reset and see if this corrects the problem. If the problem continues, call Mr. Appliance NYC.